Next: 3.3 Special topics
Up: 3.2 The processes in
Previous: 3.2.4 Die cavity
The main concern in this phase is to extract heat from the die and to solidify
the liquid metal as aptly as possible.
The main resistance to the heat flow is in the die and
the cooling liquid (oil or water based solution)
put reference to the english group.
The heat transfered to the cooling liquid is via boiling mechanism
in some part of the process.
put boiling graph of Q vr. and to discuss the
different mechanisms for steady state and when.
However, the characteristic boiling heat transfer time to achieve a steady state
is larger than the whole process occurs and the typical equations
(steady state) for the preferred
situation (heat transfer only in the first mode) are not accurate.
Thus, when we have very limited understanding of so many aspects of the process
clearly, the effects of each process on other processes is also cluttered.
Genick Bar-Meir ||| www.potto.org
copyright Dec , 2006
The pdf version is also available here